Top Grade Economical Silicone Gasket Maker:
Item: MPB101
Specifiction: 45g/set, 12sets/inner, 12inners/CTN
Meas: 53.8*42.8*28.9cm
Main Component:
α , ω -Dyhydroxyl Methyl Silicone
Color: Transparent, black, grey, blue, red.
Feature of sealant:
This product is one kind of sulfur silicone sealant with one acid component which could be applied at any climate and could take chemical reaction with the water in air rapidly. Good aging-resistant ability, high flexible, perfect performance of high or low temperature resistant. Several machine waster water resistant, good elastic.
Scope of application:
This product is used for sealing of car, gear case of motor, fore-and-art board, water pump, plane flange, cover board of other machine equipment.
Using Method:
1. Cleaning up the surface with the cotton fabric, guarantees the surface not to have the dust, the greasy dirt, the rusty stain and so on.
2. In order to obtain good outward appearance, paste the temporary protection adhesive tape, near the place to be pasted after clean the surface, pull out after paste glue.
3. Pierce the seal with the cap, cover the mouth, cut bevel the tube mouth.
4. Spread the sealant evenly on the place which need to be sealed or bonded. The operation should be continuously, guarantee the sealant continuously squeeze out at cylinder shape, move the glue mouth evenly and slowly, prevent the form of bubble or hole is move too fast.
5. The sealant form shape at approximately 10 minutes, when assembly maintains the gasket thickness, fold gathers the curing at normal temperature 24 hours.
Warning:
1. This product will release a few acetic acid in the solidification process, the working conditions should maintain ventilate.
2. Do not put within kids reach, non-toxic after solidifies completely, avoid eye contact before solidification, if touches the eye carelessly, use massive water to wash, if serious go to see a doctor.
3. When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble, affects the seal effect.
4. After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth.
5. This product should be operated at temperature 5-40, relative humidity 40-80%
Storage and packing:
1. This product is non-flammable, seal store in 10-27 centigrade cool dry place.
2. The shelf life for top grade acetic gasket maker s 12 months from date of production.
3. Packing 45g/PC, 85g/PC, 85PC+3G promotion in tube.
We are China Adhesive manufacturer. And The adhesive is a compound that adhesives or bonds two items together. Adhesives may come from either natural or synthetic sources. Some modern adhesives are extremely strong, and are becoming increasingly important in modern construction and industry.
| No. |
Item |
Technical Parameter |
| Top grade |
Common grade |
| 1 |
Appearance |
Exquisite well-proportioned cream,no agglomeration, no gelling, no surface solidify, no bubble, hard dispersing |
| 2 |
Prolapse Distance |
Vertical mm |
≤ 3 |
| plane |
No distortion |
| 3 |
Density |
0.93-0.98 |
0.93-0.98 |
| 4 |
Extrusion , ml/min |
≥ 400 |
≥ 400 |
| 5 |
Surface setting Time, mm |
5-15 |
5-15 |
| 6 |
Shao's Hardness |
20-30 |
15-30 |
| 7 |
2 3 C Standard extend |
≥ 0.4 |
≥ 0.4 |
| 8 |
Bonding destroy area under under standard condition % |
≤ 5 |
≤ 10 |
| 9 |
Elastic recover rate% |
≥ 80 |
≥ 80 |
| 10 |
Extend bond rate under standard condition |
100% no damage |
100%no damage |
| 11 |
Setting time mm/24h |
3-8 |
/ |
| 12 |
Oil-Leakage rate |
≤ 2 |
/ |
| 13 |
applying temperature |
-40~ 15 0 C |
-40~ 120 C |
FAQ:
Q 1. Are you a factory or a trading company?
A: We are a large manufacturer from China has more than 30 years ago .has 200 employees, our Brand is "MAGPOW".adhesive.
Q 2. Can i make a testing order ? maybe not enough your MOQ is ok ?
A: yes, we accept testing order for you checking our quality. if not enough our MOQ please asking our best price for you before you order.
Q 3. do you Accept make our special packing design?
A: yes. we accept OEM or ODM orders.
Q 4. How is your control the quality ?
A: We have a professionala quality controlled team and related equipments for make sure all goods are high quality before we shipping.and our products are all passed SGS and others some Certifications.
Q 5. How is your control the quality ?
A: We have a professionala quality controlled team and related equipments for make sure all goods are high quality before we shipping.
Q 6. These adhesive shelf life is 12 month as you printed,But my customer wont use offten,how solve this problem
A: yes, we will print the Pro date and Exp date on the package, if OEM yourself brand, we can according to your requirements to printing.
Q 7. Can
i use my own forwarder to transport the products for me
A: yes, you can use your forwarder to transport the products for you.
More of our hot selling products:
Advantage:
1-Super adhesion strength
2-Big Brand " MAGPOW" over 20 years ago, Reliable quality .
3-Fast-dry, surface dry in 5-6 mins
4-Lower smell, Envionment friendly and healthly. easy apply without impurity
5-Heat-resistant, aging resistance
6-All-purpose bonding materials
Interesting ? Send inquiry right now,Click here!
Audited Supplier 
){kind=link}
){kind=link}