Company Profile
RESINZOSIL Silicone Sealant 85g rtv silicone sealant gasket maker for Cylinder head
About us :
Our "MAGPOW" group's predecessor was HuNan Magic Power Industrial Co.,LTD. Created in November 1989, Located in China has more han 30 years ago.in the famous of fireworks -- liuyang city.
we are one of the top 1 professional speciallized in produce any kinds of adhesive supplier in China. our factory covers an area .of about 150000 square meters. 300 employes, has 36 production line , Advanced technology production equipment. 50 QA,QC persons ,20 Chemical technical testing analyst. so it insurance 100% higher quality products.
we doing our "MAGPOW" trademark or OEM customer's own brand. Our adhesive(glue) was exported lot of different countries! Was highly appreciated from the clients! Welcome customers become our agent and inquiries.
| Item: |
MPB109 |
| Color: |
Black and white, Grey ,clear |
| MOQ: |
100pcs |
| Carton size: |
67*43*29cm |
| Usage: |
Auto parts repair |
Our Advantages
Specification: 45g/pc, 12pcs/inner, 12inners/cts
Meas: 45.3*29*63.8cm
Feature:
This product is one kind of sulfur silicone sealant with one acid component which could be applied at any climate and could take chemical reaction with the water in air rapidly. Good aging-resistant ability, high flexible, perfect performance of high or low temperature resistant. Several machine waster water resistant, good elastic. Color: Transparent, black, grey, blue, red.
Main Component: α , ω -Dyhydroxyl Methyl Silicone
Scope of application:
This product is used for sealing of car, gear case of motor, fore-and-art board, water pump, plane flange, cover board of other machine equipment.
Using Method:
1. Cleaning up the surface with the cotton fabric, guarantees the surface not to have the dust, the greasy dirt, the rusty stain and so on.
2. In order to obtain good outward appearance, paste the temporary protection adhesive tape, near the place to be pasted after clean the surface, pull out after paste glue.
3. Pierce the seal with the cap, cover the mouth, cut bevel the tube mouth.
4. Spread the sealant evenly on the place which need to be sealed or bonded. The operation should be continuously, guarantee the sealant continuously squeeze out at cylinder shape, move the glue mouth evenly and slowly, prevent the form of bubble or hole is move too fast.
5. The sealant form shape at approximately 10 minutes, when assembly maintains the gasket thickness, fold gathers the curing at normal temperature 24 hours.
Warning:
1. This product will release a few acetic acid in the solidification process, the working conditions should maintain ventilate.
2. Do not put within kid's reach, non-toxic after solidifies completely, avoid eye contact before solidification, if touches the eye carelessly, use massive water to wash, if serious go to see a doctor.
3. When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble, affects the seal effect.
4. After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth.
5. This product should be operated at temperature 5-40C, relative humidity 40-80%
Storage and packing:
1. This product is non-flammable, seal store in 10-27C cool dry place, term of validity for top grade, medium grade, is 12 months, 9 months respectively.
2. Packing: 85g/pc, in tube.
| No. |
Item |
Technical Parameter |
| Top grade |
Common grade |
| 1 |
Appearance |
Exquisite well-proportioned cream,no agglomeration, no gelling, no surface solidify, no bubble, hard dispersing |
| 2 |
Prolapse Distance |
Vertical mm |
≤ 3 |
| plane |
No distortion |
| 3 |
Density |
0.93-0.98 |
0.93-0.98 |
| 4 |
Extrusion , ml/min |
≥ 400 |
≥ 400 |
| 5 |
Surface setting Time, mm |
5-15 |
5-15 |
| 6 |
Shao's Hardness |
20-30 |
15-30 |
| 7 |
2 3 CStandard extend |
≥ 0.4 |
≥ 0.4 |
| 8 |
Bonding destroy area under under standard condition % |
≤ 5 |
≤ 10 |
| 9 |
Elastic recover rate% |
≥ 80 |
≥ 80 |
| 10 |
Extend bond rate under standard condition |
100% no damage |
100%no damage |
| 11 |
Setting time mm/24h |
3-8 |
/ |
| 12 |
Oil-Leakage rate |
≤ 2 |
/ |
| 13 |
applying temperature |
-40~ 15 0 C |
-40~ 120 C |
Gasket maker more picture.
FAQ:
FAQFAM F
- Q 1. Are you a factory or a trading company?
A: We are a large manufacturer from China has more than 30 years ago .has 200 employees, our Brand is "MAGPOW".adhesive.
Q 2. Can i make a testing order ? maybe not enough your MOQ is ok ?
A: yes, we accept testing order for you checking our quality. if not enough our MOQ please asking our best price for you before you order.
Q 3. do you Accept make our special packing design?
A: yes. we accept OEM or ODM orders.
Q 4. How is your control the quality ?
A: We have a professionala quality controlled team and related equipments for make sure all goods are high quality before we shipping.and our products are all passed SGS and others some Certifications.
Q 5. How is your control the quality ?
A: We have a professionala quality controlled team and related equipments for make sure all goods are high quality before we shipping.
Q 6. These adhesive shelf life is 12 month as you printed,But my customer wont use offten,how solve this problem?
A: yes, we will print the Pro date and Exp date on the package, if OEM yourself brand, we can according to your requirements to printing.
Audited Supplier 
){kind=link}
){kind=link}