Strongest Epoxy Based Adhesive Resin Wholesale

Product Description

Auto Mative Spare Parts And Handware Epoxy Adhesive AB Components Used For Bonding All Kinds Of Hard Materials

Item No.: MPA103
Spec:28g/set,12sets/inner,12inners/ctn
Meas:43.5*32.5*44.5cm

Product Feature
5 Minutes Rapid Clear Epoxy Adhesive is based on the room temperature, having the features of:
(1) solidifying rapidly within 3-5 minutes,
(2) suitable for small parts and structural strength
(3) can be used after two hours
(4) quick set and high adhesive performance
(5) waterproof and chemical medium
(6) can be lacquered and waxed

 

 

Technical Data

Name Of Product	Item Code	Component Rate ( A:B=1:1 )	Appearance	Setting  Speed (25ºCmix glue 5-10g)	Tensile shear Strength (25ºC*48h, Steel-Steel)
5 Minutes Rapid Carbon Black Epoxy Adhesive	SK-1111	A : B=1 : 1	Component A is white mucus, Component B is black mucus	3-5 Mins	≥ 10MPa

Scope of Application
The products of this series are widely used for bonding all kinds of hard material, like iron, casting iron, steel, aluminum, glass, pottery, graphite, concrete, cement etc. And they could be applied to bond and repair in the field of daily households, home appliance, artworks etc.
 

 

 

Main Component
A component is the modified Epoxy Resin and mucus, B component is modified Sulfur Curing Agent and mucus.

Direction For Use
1.The surface should be clean and dry, without oil or wax
2.Take down the cap, pierce the seal, squeeze out evenly (A:B=1:1). cover the surface with glue based on the mixing of the two components evenly,
3.Press it according to the actual condition.. it could achieve the using intensity after the solidifying for two hours during the normal temperature, it is suggested to operate at above 5ºC.


 

 

 

 

Warning
1.It must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess to much.
2.Tighten the caps after usage .Do not mix the cap of part A and B.
3.Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying.
4.Avoid touching with the eyes and skin directly. If getting touch with the skin, please wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please wash them immediately with plenty of water, and see the doctor for serious situation.
5.Take strict precautions against touching by the kids and entering into the mouth.

 

 

Storage & Packing

1.Stock the products with air-tight seal in the environment of shade and dry. The shelf life is one year. It is available to use based on passing of the test if being beyond the shelf life.
2.Preserve and transport as non dangerous products.
3.Packing specification: 30g/card, in tube.

Technical Feature