Best Performance Epoxy for Marble Pin Holes Repair

• Customization: Available
• Bonding Function: Structural Adhesive
• Morphology: Liquid
• Model NO.: 1150
• Material: Epoxy
• Classification: Room Curing
• Main Agent Composition: Thermosetting Resin
• Characteristic: Weatherability
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Color: Clear
• Mix Ratio: 4:1
• Transport Package: in Plastic Drum
• Specification: 200kg/drum
• Trademark: MAGPOW
• Origin: China
• HS Code: 35069120
• Production Capacity: 10000kg / Week

Product Description

Crack Filling Epoxy

Item No.: 1150

Mix ratio by weight: A:B=3:1

 

Application: Mainly used for all kinds of slabs (marble, limestone, granite, sandstone) surface micro-cracks, sand holes, chicken feet, ants road, uneven repair.

No.	Project		Technical data
1	Appearance	A  component	Colorless transparent liquid
		B  component	Colorless transparent liquid
2	Viscosity(mPa·s)	A  component	600-1000
		B  component	10-30
3	Adjusting ratio(A∶B)		3∶1
4	Applicable period(25ºC,min)		60-90
5	Initial curing time(25ºC,h)		3-4
6	Tensile shear strength(RT48h,MPa)		≥7.0

 

 

[Performance Characteristics]

The product is in low viscosity and high penetration. It has strong adhesion and strength after cured.It is abrasion, water, oil, chemical and aging resistant. The glue layer is colorless and transparent and anti yellowing.

[Features/Advantages]

1.  low viscosity

2. Perfect penetration to micro-cracks to reinforce the stone structure and increase the gloss.

3. good anti-yellowing;water , oil, weak acid and alkali resistance

4. Transparent glue layer and high hardness and weather resistant.

5. Product reach the standard of GB18583 and ROHS, Environmental friendly

[Instructions]

[Steps for usage]

1.Slabs should be heated or ventilated to remove moisture;

2. Use a brush to remove dust, scum and other impurities from the surface of the stone;

3. Mix glue in A:B=3:1 (by weight ), and mix completely;

4. Scrape back and forth and apply the glue evenly on the surface of the stone;

5. initial curing in 3-4 hours under 25 °C , and proceed to next procedure after 24 hours 

6. Please clean the tools before the glue is uncured.
 

[Notes]
1.Some facts will affect the performance of the glue as below:
l The stone is not dry enough or the air humidity is too high, the stone absorbed the moisture from air
l Part A and B was not mixed exactly base on the stipulated ratio
l Glue mix uneven or not completely
l The mixed glue was not used within the pot life.

2.In winter and low temperature, the product may form crystal or caking. Just heat up the glue and make the crystal or caking dissolved, this will not affect the glue performance.

3.Clean and wipe the glue on cloth or skin before it cured with alcohol, then flush with soap water. If in eyes, flush with plenty of water and seek for medical cure; if swallowed, do not emetic, drink plenty of egg white or milk, then seek for medical cure immediately.

[Protective measures]
Due to the individual differences of the operators, the glue may cause allergies to certain parts of the skin, but the product meets the national mandatory standard of GB18583-2008, which is an environmentally friendly product and has no other harm to the human body. It is recommended that your company use the following necessary protection when using the compound glue:
1. Use in a well ventilated environment;
2. Equipped with necessary protective clothing, protective gloves and protective masks;
3. to avoid direct contact with the skin, if you accidentally contact the skin, you can use soapy water to clean;
4. Before adjusting the glue, first open the cover of component B, let the free low molecular substances volatilize, and then take the glue and adjust the glue;
5. If there is an allergic reaction, employees should change jobs.
 

[Stock and Package]

1.Sealed and stock in cool, dry and ventilate place, stock temperature under 5-40ºC. Shelf life one year from the production date, it can be still used based on passing the test when beyond the shelf life. 

2.This product is corrosive goods, keep far away from the heat, fire, sunshine and rain during delivery and stock. In the process of transportation, operate gently, it is prohibited to roll, impact, stress, inversion, and offset

3.Packing size: 100Kg/set, in plastic drum packing. 1000kg/set, Part A in Iron drum packing and B in plastic drum packing.