Clear Color Silicone Gasket Maker with High Strength for Car Engine

• Customization: Available
• CAS No.: 63148-62-9
• Formula: C6h18osi2
• Model NO.: MPB109
• EINECS: 9009-54-5
• Bonding Function: Cream
• Morphology: Cream
• Application: Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing
• Material: Silicone
• Classification: Room Curing
• Main Agent Composition: Silicone
• Characteristic: Cream
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Color: Clear
• Item No.: Mpb108
• Model Name: Silicone Gasket Maker
• Appearance: Uniform Delicate Cream
• Density: 0.93-0.98
• Surface Dry Time: 5-15 Mins
• Solidify Speed mm/24h: 3-8
• Shore a(Hsa): 20-30
• Extrusion.Ml/Min: More Than 400
• Elastic Recover Rate%: Less Than 5
• Using Temperature: Below 40-240.C
• Property: Acetic Gasket Maker
• Transport Package: Normal Export Carton Packaging
• Specification: 85g/set
• Trademark: MAGPOW
• Origin: China
• HS Code: 3506100090
• Production Capacity: 5000 Cartons / Week

Product Description

Clear Color Silicone Gasket Maker With High Strength For Car Engine 

 

Item:MPB109

Spec:85g/set,12sets/inner,12inners/ctn
Meas: 67.3 * 42.8 * 28.9  CM 

Product Feature:
This product is one kind of sulfur silicone sealant with one acid component which could be applied at any climate and could take chemical reaction with the water in air rapidly. Good aging-resistant ability, high flexible, perfect performance of high or low temperature resistant. Several machine waster water resistant, good elastic. Color: transparent, black, grey.
 

 

 

Feature:

No.	Item		Technical Parameter
			Top grade	Common grade
1	Appearance		Exquisite well-proportioned cream,no agglomeration, no gelling, no surface solidify, no bubble, hard dispersing
2	Prolapse Distance	Vertical , mm	≤ 3
		plane	No distortion
3	Density		0.93-0.98	0.93-0.98
4	Extrusion , ml/min		≥ 400	≥ 400
5	Surface setting Time, mm		5-15	5-15
6	Shao's Hardness		20-30	15-30
7	2 3 ºC Standard extend		≥ 0.4	≥ 0.4
8	Bonding destroy area under under standard condition %		≤ 5	≤ 10
9	Elastic recover rate%		≥ 80	≥ 80
10	Extend bond rate under standard condition		100% no damage	100%no damage
11	Setting time mm/24h		3-8	/
12	Oil-Leakage rate		≤ 2	/
13	applying temperature		-40~ 15 0 ºC

Scope Of Application:
This product is used for sealing of car, gear case of motor, fore-and-art board, water pump , plane flange, cover board of other machine equipment.

 

 

Direction For Use:
1,Cleaning up the surface with the cotton fabric, guarantees the surface not to have the dust, the greasy dirt, the rusty stain and so on.
2,In order to obtain good outward appearance, paste the temporary protection adhesive tape , near the place to be pasted after clean the surface, pull out after paste glue.
3. Pierce the seal with the cap, cover the mouth, cut bevel the tube mouth.
4. Spread the sealant evenly on the place which need to be sealed or bonded. The operation should be continuously, guarantee the sealant continuously squeeze out at cylinder shape, move the glue mouth evenly and slowly, prevent the form of bubble or hole is move too fast.
5,The sealant form shape at approximately 10 minutes, when assembly maintains the gasket thickness, fold gathers the curing at normal temperature 24 hours.

 

 

Warning:

1. This product will release a few acetic acid in the solidification process, the working conditions should maintain ventilate.
2. Do not put within kid's reach, non-toxic after solidifies completely, avoid eye contact before solidification, if touches the eye carelessly, use massive water to wash, if serious go to see a doctor.
3. When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble , affects the seal effect.
4,After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth.
5,This product should be operated at temperature 5-40ºC,relative humidity 40-80%

 

Company Profile

HuNan Magpow Adhesive Group Co.,Ltd is a Hi-tech enterprise in developing, manufacturing and sales of all kinds of adhesive with factory in Hunan International Commerce in Changsha City, China. It has more than RMB 10,000,000 capital and over 2,000 tons of production capacity per year. The adhesive produced in the corporation are popular all over the world, for example, south-east Asia, Europe & Africa etc. The company is authorized as Hunan provincial famous brand, the implementer unit of national torch program, the qualification by ISO9001:2000 international quality system, the member of China Adhesive Industry Association. Main product with 'MAGPOW' brand is authorized as Hunan provincial famous trademark.  

 

The company has powerful researching ability by long-term hiring foreign adhesive experts from Germany, France and national-wide famous experts for development of technology and technical instruction. Products include Epoxy adhesive, Methacrylate adhesive, Gasket maker, Silicone sealant, Fixing foam, Neoprene glue, Wood glue, Spray glue, PVC glue, Cyanoacrylate adhesive, Adhesive tape, Fly/mouse killing glue etc. which is used in architecture, stone manufacture, industry, fireworks and art for curing, sealing and solidifying and curing of hardware and commodity in more than 60 countries and districts in southeast Asia, Europe and Africa. The company wants to create limitless value for you by its so many years accumulation.