Magpow Mph101 280ml/PCS High Quality Acetic Silicone Sealant for Decoration

• Customization: Available
• CAS No.: 7085-85-0
• Formula: 7085-85-0
• Model NO.: MPH102
• EINECS: 7085-85-0
• Bonding Function: Instant Adhesive
• Morphology: Uniform Delicate Cream, Colored
• Application: Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing, Construction, Fiber & Garment, Footwear & Leather
• Material: Acrylic
• Classification: Construction and Decoration
• Characteristic: Waterproof
• Color: Clear
• Brand Name: Magpow
• Commodity: Top, Medium and Common Grade
• Cravity g/cm3: 0.98-1.0
• Extrude Property: More Than 80
• Flexibility: More Than 150
• Peel Strength: More Than 0.4
• Fix Extend: No Damage
• Stock: Full
• Custom-Tailor: Can Accept Customer′s Brand and Design
• Transport Package: 300ml/PC, 24/CTN
• Specification: SGS
• Trademark: MAGPOW
• Origin: Changsha, Hunan
• HS Code: 3506100090
• Production Capacity: 500 Cartons / Week

Product Description

High quality Non-toxic Acid Silicone Sealant:

Specification: 300ml/pc, 24/ctn
Meas: 30*20*24.5cm
Description:
Feature: This product is neutrality solidifies, has the characteristics of
High viscosity, the medium module, the high flexibility high strength, outstanding aging resistance, performance fine. There are colors of transparent, gray, porcelain white.
Main Composition: α , ω -Dihydroxyl Methyl Silicone
Scope Of Application: This product can be widely used, available in bonding of glass, rubber, lumber, ceramics, metal and textile fiber surface; This product not suitable to use in seep out the fat, the plasticizer or the solvent material surface; In the airtight place and the rime not, successive years immerses or all year long the moist place.
Using Method:
1. Clean the surface to get rid of the rust, oil, or any dirty.
2. Cut the cap point, twists the cap mouth, cut at 45 degree angle bevelling according to need.
3. In order to get the smooth glue, hold the bottle at 45 degree angle, squeeze the glue through cap mouth.
4. If further sealing needed, please finished operation within 5 minutes, wipe off the surplus glue with dry tissue.
5. After completely solidify, amend the glue by knife.
Warning:
1, This product will release a few acetic acid in the solidification process, the working conditions should maintain ventilate.
2, Do not put within kid's reach, non-toxic after solidifies completely, avoid eye contact before solidification, if touches the eye carelessly, use massive water to wash, if serious go to see a doctor.
3, When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble, affects the seal effect.
4, After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth.
5, This product should be operated at temperature 5-40C, relative humidity 40-80%
Storage And Packing:
1. The product is nonflammable. Keep dry and shade, air tight during storage. The shelf life is nine months.

No.	Item			Parameter
				Top grade silicone sealant	Medium grade silicone sealant
1	Appearance			Exquisite well-proportioned cream, no no agglomeration, no gelling. no bubble, hard dispersing
2	Prolapse distance		vertical  mm	≤ 3
			Aclinic	No distortion
3	Density			0.98-1.03		1.34-1.42
4	Extrusion ,  ml/min			≥ 400		≥ 400
5	Surface setting Time,mm			5-20		5-20
6	Shao's Hardness			20-40		20-40
7	elongation Mode /MPa	2 3 C Standard		≥ 0.4		/
		Under water		≥ 0.4		/
		Water-Ultraviolet radiation		≥ 0.4		/
8	Bonding destroy area %		2 3 C Standard	≤ 5		≤ 10
			Under water	≤ 5		/
			Water-Ultraviolet radiation	≤ 5		/
9	Elastic recover rate%			≥ 90		≥ 80
10	Extend bonding rate			60% damage		60% damage
11	Setting time mm/24h			3-8