Transparent Epoxy Resin Steel Glue
Scope of Application
The products of this series are widely used for bonding of metal and non-ferrous, connecting, sealing and repairing of hard materials, construction, auto spare parts, electronic components, also for usage in the material of pearls, jade, arts and crafts, antique etc.
| Name Of Product |
Item Code |
Component Rate (A:B) |
Appearance |
Solidifying Speed (25ºCmix glue 3-8g) |
Shear Strength (25ºCX48h,Steel- Steel) |
| 5 Minutes Rapid Clear Epoxy Adhesive |
SK-111 |
A:B=1:1 |
Clear color or light yellow thick liquid for both Component A and B |
3-5 Mins |
≥10MPa |
Epoxy AB Glue Directions
1. Clean and dry the surface after getting rid of the oil, dirty, rust.
2. Adjust the glue according to the appropriate proportion. Smear the surface with glue based on the mixing of the two components evenly.
3. Bond them by pressure. It could achieve the using intensity after the solidifying for one hour under the normal temperature.
4. Solidifying in 24 hours, it would reach the max intensity.
Epoxy AB Glue Production Line
Epoxy AB Glue Notice
1. It must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess too much.
2. Tighten the caps after usage. Do not mix the cap of part A and B.
3. Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying.
4. Avoid touching with the eyes and skin directly. If getting touch with the skin, please wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please wash them immediately with plenty of water, and see the doctor for serious situation.
5. Take strict precautions against touching by the kids and entering into the mouth.
Storage & Packing
1. Store the products with air-tight seal in the environment of shade, dry and cool place. The shelf life is 12months from the date of production. It is available to reuse based on passing of the test if being beyond the shelf life.
2. Preserve and transport as non dangerous products.
3. Packing specification: 20g/set, 12sets/inner, 12inners/ctn in tube.MEAS: 43.5 * 32.5 * 44.5cm
Audited Supplier 
){kind=link}
){kind=link}