Blue Red Black Silicone Gasket Maker in 3.5 Oz for Auto Spare Parts

• Customization: Available
• CAS No.: C6h18osi2
• Formula: C6h7no2
• Model NO.: MPB107
• Bonding Function: Instant Adhesive
• Morphology: Cream
• Application: Automobile, Construction, Fiber & Garment, Construction, Gasket Maker
• Material: Volatile Solvent Adhesives(Silicone)
• Classification: Auto Spare Parts and Hardware
• Main Agent Composition: Thermosetting Resin
• Characteristic: Waterproof
• Promoter Composition: Filler
• Composition: Organic Material
• Color: Transparent, Black, Grey, Blue, Red.
• Brand Name: Magpow
• Prolapse Distance Vertical: Less Than 3mm
• Prolapse Distance Aclinic: No Distortion
• Density: 0.93-0.98
• Extrusion: More Than 400ml/Min
• Shore a(Hsa): 20-30
• Surface Dry Time: 5-15 Min
• Using Temperature: -40 to 150 Centigrade
• Stock: Full and Can Accept Customer′s Brand
• Transport Package: 45g/PC, 12PCS/Inner, 12inners/Cts
• Specification: SGS
• Trademark: MAGPOW
• Origin: Changsha, Hunan
• HS Code: 3506100090
• Production Capacity: 500 Cartons / Week

Product Description

Specification: 85g/pc, 12pcs/inner, 12inners/cts
Meas: 67.3*42.8*28.9cm

Feature:
This product is one kind of sulfur silicone sealant with one acid component which could be applied at any climate and could take chemical reaction with the water in air rapidly. Good aging-resistant ability, high flexible, perfect performance of high or low temperature resistant. Several machine waster water resistant, good elastic. Color: Transparent, black, grey, blue, red.
Main Component: α , ω -Dyhydroxyl Methyl Silicone


Scope of application:
This product is used for sealing of car, gear case of motor, fore-and-art board, water pump, plane flange, cover board of other machine equipment.

85g high temperature red RTV Silicone Sealant Gasket Maker

 Feature:  
Makes almost any gasket instantly

Colour: Grey ,black ,clear ,blue Red

Resists cracking and shrinking

Dries tough and after it dries is still flexible

High temperature applications for Auto spare parts

Resists oil, water and anti-freeze

Using Method:
1. Cleaning up the surface with the cotton fabric, guarantees the surface not to have the dust, the greasy dirt, the rusty stain and so on.
2. In order to obtain good outward appearance, paste the temporary protection adhesive tape, near the place to be pasted after clean the surface, pull out after paste glue.
3. Pierce the seal with the cap, cover the mouth, cut bevel the tube mouth.
4. Spread the sealant evenly on the place which need to be sealed or bonded. The operation should be continuously, guarantee the sealant continuously squeeze out at cylinder shape, move the glue mouth evenly and slowly, prevent the form of bubble or hole is move too fast.
5. The sealant form shape at approximately 10 minutes, when assembly maintains the gasket thickness, fold gathers the curing at normal temperature 24 hours.

Warning:
1. This product will release a few acetic acid in the solidification process, the working conditions should maintain ventilate.
2. Do not put within kid's reach, non-toxic after solidifies completely, avoid eye contact before solidification, if touches the eye carelessly, use massive water to wash, if serious go to see a doctor.
3. When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble, affects the seal effect.
4. After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth.
5. This product should be operated at temperature 5-40C, relative humidity 40-80%
Storage and packing:
1. This product is non-flammable, seal store in 10-27C cool dry place, term of validity for top grade, medium grade, is 12 months, 9 months respectively.
2. Packing: 85g/pc, in tube.

No.	Item		Technical Parameter
			Top grade	Common grade
1	Appearance		Exquisite well-proportioned cream,no agglomeration, no gelling, no surface solidify, no bubble, hard dispersing
2	Prolapse Distance	Vertical mm	≤ 3
		plane	No distortion
3	Density		0.93-0.98	0.93-0.98
4	Extrusion , ml/min		≥ 400	≥ 400
5	Surface setting Time, mm		5-15	5-15
6	Shao's Hardness		20-30	15-30
7	2 3 CStandard extend		≥ 0.4	≥ 0.4
8	Bonding destroy area under under standard condition %		≤ 5	≤ 10
9	Elastic recover rate%		≥ 80	≥ 80
10	Extend bond rate under standard condition		100% no damage	100%no damage
11	Setting time mm/24h		3-8	/
12	Oil-Leakage rate		≤ 2	/
13	applying temperature		-40~ 15 0 C	-40~ 120 C

 

HUNAN MAGPOW ADHESIVE GROUP CO., LTD

Was founded in 1989, Leaders at all levels of care and guidance, in the community friends and the majority of customers with the help and support, has gone through more than 20 years of arduous pioneering and steady development process. Companies from the original workshop-style processing plant to national "Torch Plan" implementation of enterprises, national standards of enterprises, the state's key high-tech enterprises. Group assets worth 150 million.