Best Selling High Performance Polyvinyl Alcohol Modified PVA for Vae Emulsion PVA
Main component :Polyvinyl Alcohol
Solubility: Stable in almost all
organic solvents. Not dissolved in
animal and plant oils and grease.
[Scope Of Application]
2. Application
Paper sizing agent
Warp sizing in textile
Adhesive
Raw material of polyvinyl alcohol panel and PVA thin film
Paint and Coatings
Medicine, cosmetic and functional materials
Emulgator and dispersing agent
Specifications
a. Hydrolysis degree: 99.3% - 100.0%
b. Purity: ≥94.0%
c. Viscosity: 22.0 - 33.0mpa.s
d. Volatile: ≤5.0%
e. PH: 5~7
f. Ash: ≤0.7%
g. NaAc: ≤1.5%
[Warning]
1. The operating environment should be ventilative and should keep away of the fire. Closely sealed after use.
2. Avoid the glue contact the skin and the eye, if contacts the skin, with soap and clear water cleaning, if touches the eye carelessly, uses the clear water to flush and to see a doctor immediately.
3. If the liquid cement has the stratification when used for a long time, use after the agitation evenly, do not affect its product quality
4. Take strict precautions against touching by the kids and entering into the mouth.
5. Please make a trial to avoid usage mistakes before application.
Storage :
The material is very stable with no risk of molding and deteriorating. Under dry
condition. Indefinite when protected from moisture
Dissolving Method: Pouring a certain amount of water into the dissolving tank, the
water temperature should be below 30 ºC , then start the blender and pour into PVA slowly,
the filling speed with PVA should be keep into 10 kilograms per minutes advisable.
Confirm the PVA powder has fully dispersed (about 10-20 minutes) then heat the solution,
and it can be completely dissolved when heat to 90 ºC about 1 hour
Method of analysis: Viscosity is measured in 4% aqueous solution at 20 ºC . By a
Brookfield type viscosimeter. PH is measured in 4% aqueous solution at 20 ºC Ash
expressed as Na2O
[Certificates]
Magpow adhesive group FAQ:
1.Can we visit your factory?
Yes, warmly welcome to visit us at any time.
2.What's your factory address?
Our address(English):Lansi Road,changsha national biomedical base.Liuyang,HuNan,China.
We can pick up you.
3.Can you give us private design?
Yes, we offer OEM service.
4.What's your guarantee?
1-10 years.
5.Can u send samples to us ?
Yes, we can provide free samples in china.
6.How many days to produce 1*20FT container?
Big drum packages: 7-10days.
Small packages: 20-25days.
7.What are the documents we provide?
CE,CI,PL,CO / FORM E / FORM A , B/L according to your demand.
8.How do I get updated MSDS information?
Material Safety Data Sheets (MSDS), can be accessed on the Product Details Pages for the individual products, or contact the MSDS Coordinator for assistance:
Audited Supplier 
){kind=link}