| Customization: | Available |
|---|---|
| CAS No.: | C6h18osi2 |
| Formula: | 3506100090 |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Item:MPD167
Specifiction:750mL/pc, 500ml/pc, 12pcs/ctn,in iron barrel,straw type and gun type.
Meas:28*21*36cm
Technical Feature
| ITEM | Parameter |
| Base | Polyurethane |
| Consistency | Stable Foam |
| Curing System | Moisture-cure |
| Tack-Free Time (min) | Dust-free after 20-25 min |
| Cutting Time (hour) | 1-1.5 (+25°C) ,2-3(-25°C) |
| Yield (L) | 35-40 |
Scope of application:
1.Installing,fixing and insulating of door and window frames;
2.Filling and sealing of gaps,joint,openings and cavities;
3.Connecting of insulation meterails and roof construction;
4.Bonding and mounting;
5.Insulating the electrical outlets and water pipes;
6.Heat preservation,cold and sound insulation;
7.Packaging purpose,wrap the precious&fragile commodity,shake-proof and anti-pressure.
Using Method:
1. 3-5 hour.
2. Before the use, sways the hoisting bucket fully (at least 20 times), guarantees in the pot the material to be even.
3.If uses the gun type froth sealing medicinal preparation, when use the hoisting bucket inversion and the spray gun screw joint, revolving opens the flow valve, after the adjustment current capacity carries on again spraying.
4. When spraying pays attention to the approaching speed, usually sprays the quantity to have to fill the volume one half then. Filled when the vertical slit when should from bottom to top, on the packing such as ceiling slit, as a result of the gravity function, the solidification froth possibly has not been able to fall, after suggested just filled carries on the suitable support, treated the froth solidification and evacuates the support again after the seam wall caking.
5. About 10 minutes, the froth skin drying, after 1 hour the froth solidifies approximately, and the froth achieves the best load-bearing effect stably in g.
6. Slices the extra amount froth with the knife, then in superficial water used soil mortar, coating or silica gel .Before the construction, should remove the greasy dirt and the floating dust from the surface, and sprays the few water in the construction surface, causes its moistly
7. the use finished, takes down the hoisting bucket, cleans cleanly with the special-purpose cleansing agent the spray gun
Warning:
1. The hoisting bucket normal application temperature for 5~ 40, the best application temperature 18~ 25, the temperature can affect the foaming quantity, the temperature excessively is low when uses the foaming quantity to reduce also can have the few excesses. Therefore in the low temperature situation suggested this the constant temperature lays aside in 30~ 40 the environment 30 minutes to use again, or after is not higher than 40 the lukewarm water immersion hoisting bucket heating uses.
2. Suggested one time uses up, if causes not to be able to use up, may use: Keeps in the hoisting bucket the spray gun, the shutting down rate-of-flow controller (guards against air to enter, causes froth hardening and spray gun damage), the erect lays aside in ventilates coolly place; Or dismounts the hoisting bucket, is clean with the cleansing agent the spray gun and the valve clean, the erect lays aside is ventilating coolly place, but long-term storage.
Storage and packing:
1. 12 months in unopened packing store in temperature between +5 centigrade to +25 centigrade,keep in cool,shade and well ventilated area,Always keep the can with the valve pointed upwards.
2. Preserve and transport as non dangerous product.
We are China Adhesive manufacturer. And The adhesive is a compound that adhesives or bonds two items together. Adhesives may come from either natural or synthetic sources. Some modern adhesives are extremely strong, and are becoming increasingly important in modern construction and industry.
){kind=link}