MAGPOW High Bonding Strength Contact Cement/Contact Adhesive For Aluminum Board man-made Board Rubber Letathers
Specifiction: 3L/tin,6tins/ctn
Meas: 55*17.5*27.5cm
Feature:
The product is the single component of volatile dry type adhesive with perfect performance of small viscosity, water and oil resistant, durable, fast dry.
Main Component:
Neoprene
Scope Of Application:
This product is mainly used in the daily repair. Such as repair of leather, rubber, wood, fabric, paper etc.
Using Method:
1.Coarse the smooth material with the sandpaper or the ceramic file
2.Spread evenly on the dry and clean surface, cool a moment, spread again when not viscosity For multi holes material must spread 2-3 times.
3.When touches the glue with the finger, when sticks not wiredrawing, the alignment fitting and exerts pressure, be sure not dislocation migration, after the normal temperature solidifies for 48 hours, can be put into operation.
Warning:
1. The operating environment should be ventilative and should keep away of the fire. Better to use at room temperature 15ºC~28ºC .
2. When use, increases 5~15% Lek sodium, may reduce the solidification time, enhances the cementation intensity.
3. Seal closely after use in order to avoid solvent volatility, if the viscosity too is big, add proper amount coca the xylene to dilute.
4. Avoid the skin and the eye contact, if touches the skin, clean with soap water, if touches the eye carelessly, uses the massive clear water flushing immediately, go to hospital for serious situation.
5. Please make a trial to avoid usage mistakes before application. Our products have been widely used on the market, the quality is reliable. But we do not guarantee that difference will cause under difference using condition, material or technique. So user should use after trail use.
Storage And Packing:
1.Stock the products in the air-tight seal at the temperature of 10-35ºC. The shelf life is one year. It is available to use based on passing of the test if being beyond the shelf life.
2.Preserve and transport as flammable products.
3.Packing specification: 750ml/tin, in iron tin: 15kg/barreal, in iron barrel.
Technical Feature
| Name of Product |
Appearance |
Viscosity(25ºC.mPa.s) |
Solid Content(%) |
Peel Strength (25ºCx48h,canvas-canvas. n/2.5cm |
| Contact cement (303) |
Light yellow thick liquid |
2000-4000 |
≥20 |
≥60 |
| Contact cement (305) |
Light yellow thick liquid |
1500-2500 |
≥17 |
≥40 |
| Contact cement (Environmental-3062) |
light yellow thick liquid |
1000-2500 |
≥22 |
≥60 |
[Scope Of Application]
This product is mainly used in manufacture and maintenance file of mechanism, electronic, appliance, shoes-making, leather as well as bonding of rubber, leather, wood, glass, metal, pottery etc, also aluminum board, fireproof board, man-made board etc.
[Using Method]
1. Remove the oil, dirty from the surface and keep clear, dry.
2. Spreads evenly on surface of two joint material, after dries moderately, folds gathers with exerts pressure (for example spread 2~3 times for multi hole joint material)
3. The application adhesive could be achieved after drying for 48 hours at the room temperature of 25° C. The best adhesive performance is available after leaving aside for 6 days.
[Warning]
1. The operating environment should be ventilative and should keep away of the fire. Closely sealed after use.
2. Avoid the glue contact the skin and the eye, if contacts the skin, with soap and clear water cleaning, if touches the eye carelessly, uses the clear water to flush and to see a doctor immediately.
3. If the liquid cement has the stratification when used for a long time, use after the agitation evenly, do not affect its product quality
4. Take strict precautions against touching by the kids and entering into the mouth.
5. Please make a trial to avoid usage mistakes before application.
[Storage And Packing]
1. Stock the products in the air-tight seal at the temperature of 10-35° C. The shelf life is one year. It is available to use based on passing of the test if being beyond the shelf life.
2. Preserve and transport as flammable products.
3. Packing specification: 125ml/tin, 750ml/tin, 1L/tin, 3L/tin, in iron tin,200L /drum
Audited Supplier 
){kind=link}